RAM 2500 Van V8-5.9L VIN Z (1997)
Canister Purge Solenoid: Service and Repair
Fig. 28 EVAP Canister Purge Solenoid - Typical
REMOVAL
1. Remove engine cover.
2. Remove air cleaner housing.
3. Disconnect electrical wiring connector at solenoid.
4. Disconnect vacuum harness at solenoid.
5. Remove solenoid and its support bracket from intake manifold.
6. Remove EVAP solenoid from engine.
INSTALLATION
1. Install EVAP canister purge solenoid and its mounting bracket to intake manifold.
2. Connect vacuum harness and wiring connector.
3. Install air cleaner housing.
4. Install engine cover.