RAM 2500 Van V8-5.9L VIN Z (1997)
Fuel Line Coupler: Service and Repair
Fuel Line at Fuel Rail
With Pressure Test Port
Fig. 16 Latch Clip Location - Typical
A latch clip is used to secure the fuel line to the fuel rail on certain engines. A special tool will be necessary to separate the fuel line from the fuel rail
after the latch clip is removed.
DISCONNECTION/CONNECTION AT FUEL RAIL
1. Disconnect the negative battery cable from battery.
2. Perform the fuel pressure release procedure.
3. Clean the fitting of any foreign material before disassembly
Fig. 17 Latch Clip Removal - Typical
4. Pry up on the latch clip with a screwdriver.
5. Slide the latch clip toward the fuel rail while lifting with the screwdriver.
