RAM 2500 Van V8-5.9L VIN Z (1997)
9. Expand front bearing locating ring with snap ring pliers. Then slide case downward until locating ring locks in bearing groove and release snap
ring.
10. Install locating ring access cover and gasket in overdrive unit case.
NOTE: The overdrive clutch pack uses 4 clutch discs.
OVERDRIVE CLUTCH ASSEMBLY
1. Install overdrive clutch reaction ring first. Reaction ring is flat with notched ends.
2. Install wave spring on top of reaction ring. Reaction ring and wave ring both fit in same ring groove. Use screwdriver to seat each ring securely in
groove. Also ensure that the ends of the two rings are offset from each other.