RAM 2500 Van V8-5.9L VIN Z (1997)
a. Aligning locating lugs on overdrive piston to the two mating holes in retainer.
b. Lubricate overdrive piston seals with MOPAR Door Ease, or equivalent.
c. Install piston over Seal Guide 8114-3, or equivalent and inside Guide Ring 8114-1.
d. Push overdrive piston into position in retainer.
e. Verify that the locating lugs entered the lug bores in the retainer.
6. Install intermediate shaft spacer on intermediate shaft.
7. Install overdrive piston thrust plate on overdrive piston.
8. Install overdrive piston thrust bearing on overdrive piston.
9. Install transmission speed sensor and O-ring seal in overdrive case.
