RAM 2500 Van V8-5.9L VIN Z (1997)
Axle Shaft: Service and Repair
Rear Axle - 248RBI
CAUTION: Raise both rear wheels off the surface whenever a rear axle is being serviced.
REMOVAL
1. Remove the axle shaft flange bolts.
2. Slide the axle shaft out from the axle tube.
INSTALLATION
1. Clean the gasket contact surface area on the flange with an appropriate solvent. Install a new flange gasket and slide the axle shaft into the tube.
2. Install the bolts and tighten to 122 Nm (90 ft. lbs.).
