RAM 2500 Van V8-5.9L VIN Z LDC (2000)
instrument panel end bracket and the dash panel.
9. Engage the retainer for the antenna half of the antenna coaxial cable to the right instrument panel end bracket.
10. Reconnect the two halves of the antenna coaxial cable connector.
11. Install the glove box onto the instrument panel.
12. Install the end cap onto the passenger side end of the instrument panel.
13. Reconnect the battery negative cable.
Instrument Panel Antenna Cable
The instrument panel half of the antenna coaxial cable is routed from the right instrument panel end bracket to the radio receiver in a plastic trough
with the instrument panel wire harness. The instrument panel wire harness trough is secured to the instrument panel armature. In order to install the
instrument panel antenna cable into the trough, the instrument panel assembly must be removed from the vehicle.
