RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Sliding Door Interior Trim Panel: Service and Repair
Trim Panel
TRIM PANEL
REMOVAL
Fig. 1
1. Remove the screws and the door pull handle (Fig. 1).
2. Using a trim stick C-4755 or equivalent, carefully pry the trim panel away from the door inner panel. Remove the trim panel from the door.
INSTALLATION
1. Position the trim panel on the door inner panel and press inward around the edge of the panel.
2. Position the door pull handle on the trim panel with the screw holes aligned.
3. Install the pull handle screws.
