RAM 2500 Van V8-5.9L VIN Z LDC (2000)
10. Remove the power seat adjuster and motors unit from the seat riser.
11. Reverse the removal procedures to install. Tighten the seat mounting hardware as follows:
-
Seat adjuster to seat cushion frame screws - 22.6 Nm (200 in. lbs.)
-
Seat adjuster to seat riser nuts - 22.6 Nm (200 in. lbs.)
-
Seat riser to floor panel nuts - 74.5 Nm (55 ft. lbs.).
