RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Brake Master Cylinder: Service and Repair
Master Cylinder Removal and Installation
REMOVAL
1. With the engine off depress the brake pedal several times to deplete booster vacuum.
Master Cylinder
2. Remove brake lines from master cylinder.
3. Remove master cylinder mounting nuts.
4. Remove master cylinder from mounting studs.
INSTALLATION
NOTE: If master cylinder is replaced, bleed cylinder before installation.
1. Position master cylinder on mounting studs.
2. Install mounting nuts and tighten to 23 Nm (17 ft. lbs.).
3. Install brake lines and tighten to 16 Nm (145 inch lbs.).
4. Bleed base brake system.