RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Headlamp Relay: Service and Repair
REMOVAL AND INSTALLATION
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIRBAGS AND SEAT BELTS/AIRBAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR
SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND
POSSIBLE PERSONAL INJURY.
1. Disconnect and isolate the battery negative cable.
2. Remove the end cap from the driver side end of the instrument panel.
Headlamp Relay Remove/Install
3. Unplug the headlamp relay from the relay and fuse block.
4. Install the headlamp relay by aligning the relay terminals with the cavities in the relay and fuse block and pushing the relay firmly into place.
