RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Alignment: Service and Repair
Wheel Alignment
Wheel Alignment Setup
The front wheel alignment angles should be set to preferred specifications. This will prevent abnormal tire tread wear.
Before each alignment reading the vehicle should be jounced (rear first, then front). Grasp each bumper at the center and jounce the vehicle up and
down several times. Always release the bumper in the down position.
Camber and Caster Adjustment
OVERVIEW
Camber and caster angle adjustments involve repositioning the upper suspension arm pivot bar. Alignment adjustments are accomplished by changing
the position of the pivot bar.
Adjuster Tool 8199 is used to adjust the camber and caster angles.