RAM 2500 Van V8-5.9L VIN Z LDC (2000)
WITH AIR CONDITIONING
REMOVAL
If equipped with A/C, the generator and A/C compressor along with their common mounting bracket must be partially removed. Removing the
generator or A/C compressor from their mounting bracket is not necessary. Also, discharging the A/C system is not necessary. Do not remove any
refrigerant lines from A/C compressor.
WARNING: THE A/C SYSTEM IS UNDER PRESSURE EVEN WITH THE ENGINE OFF. REFER TO REFRIGERANT WARNINGS IN
HEATING AND AIR CONDITIONING.
(1) Disconnect negative battery cable from battery.
(2) Partially drain cooling system. Do not waste reusable coolant. If the solution is clean, drain the coolant into a clean container for reuse.
(3) Remove engine cover.
(4) Remove Powertrain Control Module (PCM) mounting bolts and remove PCM. Do not disconnect 60-way connector from PCM.
