RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Ignition Switch Lock Cylinder: Service and Repair
REMOVAL
1. Disconnect negative battery cable from battery.
2. Place shifter in PARK position.
3. Remove tilt-wheel lever (pulls out).
Lower Shroud Screws
4. Remove 2 lower shroud screws (size T25).
Shroud Pivot Point
5. Upper and lower shrouds are snapped together at sides. Pivot points for lower and upper shrouds is at rear of shrouds. Lower shroud is hooked to
pins on upper shroud. Tilt lower shroud down for removal.