RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Upper Shroud Screws
6. Remove 2 upper shroud screws (size T5) and remove upper shroud from steering column.
7. Ignition key must be in key cylinder for cylinder removal.
a. Rotate and hold key in START position.
Lock Cylinder Retainer Pin Access Hole
b. Position a 1/16" pin punch into lock cylinder retainer pin access hole.
c. Press in on pin punch to release lock cylinder retainer pin while releasing key to RUN position.
d. Pull lock cylinder out for removal.
INSTALLATION
1.
a. Place key into lock cylinder.
b. Place key lock cylinder into steering column by aligning positioning tab on lock cylinder to positioning slot on steering column. Locking tab
