RAM 2500 Van V8-5.9L VIN Z LDC (2000)
Fig. 39
8. Install the rear bearing and slinger, if equipped, on the pinion (Fig. 39) with:
^
Installer 6448 for the 8 1/4 axle.
^
Installer C-3095 for the 9 1/4 axle.
Fig. 40
9. Install a new collapsible preload spacer on pinion shaft and install the pinion in the housing (Fig. 40).
10. Install the pinion in housing.
11. Install the companion flange with Installer C-3718 and Holder 6719.
12. Install socket head bolts into two of the threaded holes in the companion flange, 180° apart.