RAM 3500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1998)
1). Cut off the end of the tailpipe at that point.
2.
Install tailpipe tip pin E0041686 onto the tailpipe. Ensure that the tailpipe tip is completely seated onto the tailpipe.
3.
Orient the tip so that the end of the tip is directed towards the rear of the vehicle and is parallel to the ground as shown in Figure 2.
4.
Secure the tailpipe tip with exhaust clamp p/n 52018532.
NOTE:
THE END OF THE CLAMP MUST FACE FORWARD IN THE VEHICLE AS SHOWN IN FIGURE 2.
5.9L/8.0L GAS ENGINE EXHAUST REPAIR PROCEDURE
1.
Using the tailpipe spout that is on the vehicle, measure 238 mm (9.37 in.) from the end of the top of the tailpipe (Figure 3). Cut off the end of the
tailpipe at that point.
2.
Install tailpipe tip p/n E0042760 onto the tailpipe. Ensure that the tailpipe tip is completely seated onto the tailpipe.
