RAM 3500 Truck 2WD L6-359 5.9L DSL Turbo VIN D FI (1998)
Belt Routing-5.9L Diesel Engine-Without A/C
CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in
wrong direction. Refer to images for correct engine belt routing. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley.
2. Attach a 3/8 inch ratchet to tensioner.
3. Rotate ratchet and belt tensioner counterclockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be
sure belt is properly seated on all pulleys.
