RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
NOTE: When installing a new weatherstrip on the rear door opening, remove the tear strip starting at the splice and moving around the
back of the door to the front of the opening.
Drip Rail Weatherstrip Retainer - Removal
REMOVAL
1. Separate the drip rail weatherstrip (3) from the weatherstrip retainer (1).
2. Remove the seven screws (2) and remove the retainer (1).
Drip Rail Weatherstrip Retainer - Installation
INSTALLATION
1. Install the weatherstrip retainer (1) and install the seven screws (2).
2. Position the weatherstrip (3) over the retainer flange and seat fully.
