RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Front Door Window Regulator: Service and Repair
Front Door Window Regulator - Removal
Power
REMOVAL
1. Remove the inner belt molding See: Front Door Window Glass/Front Door Window Glass Weatherstrip/Service and Repair/Front Door Inner Belt
Molding/Removal .
2. Remove the waterdam See: Front Door Panel/Service and Repair/Front Door Waterdam/Removal .
3. Remove the electric window switch from the door trim panel and connect it to the door wire harness See: Sensors and Switches/Sensors and
Switches - Windows and Glass/Power Window Switch/Service and Repair/Removal .
4. Raise the door glass to the position shown.
5. Remove the two nuts (1) that secure the door glass to the window regulator (2) through the two sight windows (3 and 4) and disengage the door
glass from the regulator.
6. Position the door glass to the full up position and secure the glass using a wooden wedge or an equivalent.
7. Lower the window regulator (4) and remove the two nuts (3) that secure the regulator stabilizer (1) to the door (2).
8. Remove the bolt (5) that secures the window regulator to the door and loosen the other two regulator bolts (7).
9. Slide the window regulator upward and disengage the two regulator bolts from the door.
10. Remove the window regulator through the opening in the door and disconnect the door wire harness (6).
Manual
REMOVAL
