RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Rear Door Latch: Service and Repair
Rear Door Latch - Removal
REMOVAL
1. Raise the window to the full up position and remove the door trim panel See: Rear Door Panel/Service and Repair/Rear Door Trim Panel -
Removal .
2. Position the water dam out of the way and disconnect the actuator rod (1) from the interior door handle actuator (2) and the door latch (5) and
remove the rod.
3. Disconnect the two actuator rods (3 and 4) from the door latch.
4. Disconnect the door wire harness connector (2) from the door latch (3).
5. Remove the three bolts (4) that secure the door latch to the door (1) and remove the latch.