RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Pedal Positioning Switch: Service and Repair
Removal
REMOVAL
1. Remove the lower drivers side bezel (4) See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Driver
Side Bezel/Removal .
2. Disconnect the electrical connector (3) from the adjustable pedal switch (2).
3. Remove the switch (2) from the lower drivers side bezel (4) by squeezing the retaining clips together and pushing the switch outwards.
