RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Tailgate Shock / Support: Service and Repair
Installation
INSTALLATION
1. Position the tailgate check cable (2) onto the left and right side of the tailgate (3) as necessary.
2. Install the bolt (1) that secures the small end of the tailgate check cable(s) to the tailgate. Tighten the bolt(s) to 23 Nm (17 ft. lbs.).
3. Position the tailgate check cable (3) to the left and right side of the cargo box below the tailgate striker (1) as necessary.
4. Install the large end of the tailgate check cable(s) onto the cargo box. Make sure that the cable lock tab(s) (4) fully engage.
