RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
6. Install the caliper (1) over rotor, Then push the caliper onto the adapter (2).
7. Install caliper slide pin bolts (4), See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation .
8. Install wheel and tire assemblies and lower vehicle, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement .
9. Apply brakes several times to seat caliper pistons and brake shoes and obtain firm pedal.
10. Top off master cylinder fluid level.
2500 & 3500
2500 & 3500
1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter (1) and anti-rattle springs (2).
3. Lubricate anti-rattle springs with Mopar brake grease.
NOTE: Anti-rattle springs are not interchangeable.