RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
3. Starting with the center bolt, torque bolts (1) to 24 Nm ( 18 ft. lbs. ).
4. Install breather tube (3) to cylinder head cover (2).
5. Install breather drain tube (4) to cylinder head cover (2).
Cylinder Head Cover Gasket
CYLINDER HEAD COVER GASKET
1. Clean oil from cylinder head cover gasket
2. Inspect cylinder head cover gasket for cuts or damage. Replace if damaged.
3. Place cylinder head cover gasket on top of rocker housing (2).
4. Install injector solenoid nuts (1) at injectors. Torque to 1.25 Nm ( 11 in. lbs. ).
5. Connect injector harness connectors (3) at cylinder head cover gasket.
