RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
4. Install the valve spring compressor tool 8319-A (1)as shown.
5. Compress the valve springs and install the valve retaining locks.
6. Remove the compressor and repeat the procedure on the remaining cylinders.
7. Install new o-ring and sealing washer on injector.
8. Lubricate o-ring and injector bore.
9. Verify sealing washer (shim) was removed with old injector.
10. Install injector Refer to See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector - Installation
.
11. Install the cylinder head See: Service and Repair/Removal and Replacement/Cylinder Head - Installation .
