RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Engine Mount: Service and Repair
Engine Mount - Removal
Front Engine Mount
REMOVAL
1. Disconnect the battery negative cables.
2. Remove the viscous fan/drive assembly.
3. Raise vehicle on hoist.
4. Install engine support fixture tool# 8534 and steel bracket tool # 8534A
5. Loosen the thru-bolt and nut.
6. Lift the engine SLIGHTLY and remove the insulator to block bolts.
7. Remove the RH insulator (2) from the vehicle.
8. Remove the LH insulator (2) from the vehicle.
Rear Engine Mount
REMOVAL