RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Exhaust Manifold: Procedures
Exhaust Manifold - Cleaning
CLEANING
Clean the cylinder head and exhaust manifold sealing surfaces with a suitable scraper. Use a Scotch-Brite(TM) pad or equivalent.
Exhaust Manifold - Inspection
INSPECTION
Inspect the exhaust manifold for cracks. Measure the exhaust manifold for flatness. Place a ruler over all of the exhaust ports and insert a feeler gauge
between the port flange and the ruler. Maximum deviation from flat is 0.20 mm (.008 inch).
