RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Fog/Driving Lamp Bulb: Service and Repair
Installation
BULB
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
lamp, the socket or the lamp wiring.
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb
life will result.
1. Align the fog lamp bulb (2) with the keyed opening on the back of the front fog lamp housing (1).
2. Insert the bulb into the housing until it is firmly seated.
3. Rotate the bulb clockwise about 30 degrees to lock it into place. The bulb connector receptacle should be pointed straight downward.
4. Reconnect the wire harness connector (3) to the bulb.
5. Reconnect the battery negative cable.
