RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
1. Clean gasket mating surfaces on castings (4) and (15).
2. Position EGR cooler bypass valve assembly to engine.
3. Position new gasket (3) between castings (4) and (15).
4. Install bolts (5) and (14). Do not tighten these bolts at this time.
5. Install bracket bolts (2) at outside of mounting bracket. Do not tighten these bolts at this time.
6. Install bracket bolts at inside of mounting bracket. Do not tighten these bolts at this time.
