RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Manifold Pressure/Vacuum Sensor: Service and Repair
Removal
REMOVAL
The combination, dual function Intake Manifold Air Temperature Sensor/MAP (IAT/MAP) sensor is installed (2) into the top of the intake manifold.
1. Clean area around sensor.
2. Disconnect electrical connector (3) from IAT/MAP sensor.
3. Remove two T-15 Torx headed screws (4).
4. Remove sensor from intake manifold.
5. Check condition of sensor O-ring (2).
