RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
1. Raise and support the vehicle.
2. Support the axle with a suitable holding fixture.
3. Remove the nuts (2), spring clamp bolts (1) and the plate that attach the spring (3) to the axle.
4. Remove the nuts (2) and bolts from the spring front and rear shackle (3).
5. Remove the spring (1) from the vehicle.
Rear Spring - Installation
INSTALLATION
1. Position spring (1) on axle shaft tube so spring center bolt is inserted into the locating hole in the axle tube.