RAM 3500 Truck 2WD L6-5.9L DSL Turbo (2008)
Windshield Washer Spray Nozzle: Description and Operation
Description
DESCRIPTION
The fluidic washer nozzles (1) are constructed of molded plastic. Each nozzle has two integral latches (2) and an anti-rotation tab (4) that secure them in
dedicated holes in the cowl plenum cover/grille panel located near the base of the windshield The domed upper surface of the washer nozzle is visible on
the top of the plenum cover/grille panel, and the nozzle orifice (5) is oriented towards the windshield glass. The washer plumbing fittings (3) for the
washer nozzles extend below the cowl plenum cover/grille panel. The cowl plenum cover/grille panel must be removed from the vehicle to access the
nozzles for service. The washer nozzles cannot be adjusted or repaired. If ineffective or damaged, they must be replaced.
