RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2002)
Rear Door Interior Handle: Service and Repair
INSIDE HANDLE ACTUATOR
REMOVAL
Fig. 5
1. Remove the screw and remove the inside handle. (Fig. 5)
2. Remove the door trim panel.
Fig. 6
3. Disconnect the latch actuator rod. (Fig. 6)
4. Remove the nuts and remove the remote handle actuator.
INSTALLATION
1. Install the remote handle actuator and install the nuts.
2. Tighten the nuts to 10 N.m (89 in.lbs).
3. Connect the latch actuator rod.