RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2002)
5. Separate the trim panel from the cargo door.
Fig. 18 Cargo Door Release Cable
6. Disengage the cargo door release cable from the inside release handle.
INSTALLATION
NOTE: When replacing door trim panel, installer must replace the X-mas tree style pin 6506878aa.
1. Engage the cargo door release cable to the inside release handle.
2. Position the trim panel on the cargo door.
3. Align all fasteners and starting at the top of the panel, push into place to secure.
4. Install the screw attaching the inside release handle to the cargo door.
5. Install the screws attaching the cargo door pull cup to the cargo door.