RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2002)
Rear Door Window Regulator: Service and Repair
Window Regulator - Manual
WINDOW REGULATOR - MANUAL
REMOVAL
1. Remove the waterdam. Refer to Rear Door Panel.
Fig. 11
2. Reinstall the window handle and raise the window to the position shown and remove the nuts. (Fig. 11)
Fig. 13
3. Remove the stabilizer nuts. (Fig. 13)
4. Disengage the door glass from the regulator lift plate and position into the full up position.
5. Secure the glass in the up position using a wood wedge or equivalent.
6. Lower the regulator.