RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2002)
6.
Position the new spring, p/n 05080680AB, into the cup holder. Insert the spring hooks into the holes in the cup holder body. (Fig. 1) Make sure
that the closed end of the spring is engaged under the plastic tabs as the original was installed (Fig. 2).
7.
Install the cup holder into the instrument panel.
8.
Install the air bag control module trim cover.
9.
Install the center bezel.
POLICY:
Reimbursable within the provisions of the warranty