RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2002)
Valve: Service and Repair
REMOVAL
1. Remove cylinder head.
2. Support cylinder head on stands, or install head bolts upside down (through combustion surface side) to protect injector tips from damage from
work bench.
3. Remove the injector clamp (Fig. 36) from the cylinder(s) to be serviced. Do not remove the bolt shown in (Fig. 36).
4. Install the valve spring compressor mounting base (special tool 8319-A) as shown in (Fig. 37). Reinstall the injector clamp bolt finger tight.