dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Instrument Panel, Gauges and Warning Indicators|Testing and Inspection > < Diagram Information and Instructions|Page 6859
Page 1
background image

Compass: Description and Operation

COMPASS

While in the compass/temperature mode, the compass will display the direction in which the vehicle is pointed using the eight major compass headings
(Examples: north is N, northeast is NE), along with the outside ambient temperature. When the compass unit is placed in the compass/compass in
degrees mode, the compass will display the direction the vehicle is heading using the eight major compass headings and in degrees (0 to 359 degrees).
North is 0 degrees, East is 90 degrees, South is 180 degrees and West is 270 degrees. It will not display the headings in minutes or seconds.

The self-calibrating compass unit requires no adjusting in normal use. The compass unit will compensate for magnetism the body of the vehicle may
acquire during normal use. However, avoid placing anything magnetic directly on the roof of the vehicle. Magnetic mounts for an antenna, a repair order
hat, or a funeral procession flag can exceed the compensating ability of the compass unit if placed on the roof panel. If the vehicle roof should become
magnetized, the demagnetizing and calibration procedures found in this group may be required to restore proper compass operation.

COMPASS MINI-TRIP COMPUTER (CMTC)

This system, located in the overhead console, displays information on outside temperature, compass direction and trip information.
The compass mini-trip computer is located in the premium overhead console on models equipped with this option. Two compass mini-trip computer
units are available. One unit is used on vehicles not equipped with the Vehicle Theft Security System (VTSS) option, and the other is used on vehicles
with the VTSS option. Both compass mini-trip computer units include the electronic control module, a Vacuum-Fluorescent Display (VFD), a compass
flux-gate unit and two push button function switches.

Compass mini-trip computer units for vehicles equipped with the VTSS include a red Light-Emitting Diode (LED) on their electronic circuit board. This
LED protrudes through the bottom of the lens on the front of the overhead console unit, and serves as the security indicator lamp. Refer to Security
Indicator Lamp in Vehicle Theft/Security Systems for more information on this feature.

The compass mini-trip computer module contains a central processing unit and interfaces with other electronic modules in the vehicle on the Chrysler
Collision Detection (CCD) data bus network. The CCD data bus network allows the sharing of sensor information. This helps to reduce wire harness
complexity, reduce internal controller hardware, and reduce component sensor current loads. At the same time, this system provides increased reliability
enhanced diagnostics, and allows the addition of many new feature capabilities.

The compass mini-trip computer provides several electronic functions and features. Some of the functions and features that the compass mini-trip
computer module supports and/or controls, include the following display options:

Compass and temperature - provides the outside temperature and one of eight compass readings to indicate the direction the vehicle is facing.

Pressing the US/M button for more than 10 seconds will toggle to the Compass/Compass in Degree Display.

This display provides one of eight compass readings to indicate the direction that the vehicle is facing and provides the compass direction in degrees (0
to 359 °)
 North is 0 °, East is 90 °, South is 180 ° and West is 270 °.

Compass and compass in degrees - provides one of eight compass readings to indicate the direction the vehicle is facing and provides the compass
direction in degrees.

Trip odometer (ODO) - shows the distance travelled since the last trip computer reset.

Average fuel economy (AVG ECO) - shows the average fuel economy since the last trip computer reset.

Instant fuel economy (ECO) - shows the present fuel economy based upon the current vehicle distance and fuel used information.

Distance to empty (DTE) - shows the estimated distance that can be travelled with the fuel remaining in the fuel tank. This estimated distance is
computed using the average miles-per-gallon from the last 30 gallons of fuel used.

Elapsed time (ET) - shows the accumulated ignition-ON time since the last trip computer reset.

Blank screen - the compass mini-trip VFD is turned OFF.

To Reset the Display

Press the Step and US/M buttons simultaneously for at least two seconds and all resettable conditions will be reset. This will occur only if a resettable
function (AVG ECO, ECO, ET) is currently being displayed.

For more information on the features and control functions of the compass mini-trip computer, see the owner's manual in the vehicle glove box.

Instrument Panel, Gauges and Warning Indicators|Testing and Inspection > < Diagram Information and Instructions|Page 6859