RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2002)
4. Install thrust plate in annulus gear (Fig. 204). Be sure plate is seated on shaft splines and against gear.
5. Install rear planetary gear in rear annulus gear (Fig. 205). Be sure planetary carrier is seated against annulus gear.
6. Install tabbed thrust washer on front face of rear planetary gear (Fig. 206). Seat washer tabs in matching slots in face of gear carrier. Use extra
petroleum jelly to hold washer in place if desired.
7. Lubricate sun gear bushings with petroleum jelly or transmission fluid.
