RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2002)
By adjusting the spring pressure acting on the regulator valve, transmission line pressure can be adjusted.
OPERATION
NOTE: Refer to the Hydraulic Schematics for a visual aid in determining valve location, operation and design.
CHECK BALLS
REGULATOR VALVE
The pressure regulator valve is needed to control the hydraulic pressure within the system and reduce the amount of heat produced in the fluid. The
pressure regulator valve is located in the valve body near the manual valve. The pressure regulator valve train controls the maximum pressure in the lines
by metering the dumping of fluid back into the sump. Regulated pressure is referred to as "line pressure."
