RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
Pedal Positioning Switch: Service and Repair
ADJUSTABLE PEDAL SWITCH
REMOVAL
1. Remove the lower drivers side bezel.
2. Disconnect the electrical connector from the adjustable pedal switch.
3. Remove the switch from the lower drivers side bezel by squeezing the retaining clips together and pushing the switch outwards.
INSTALLATION
1. Install the switch to the lower drivers side bezel by pushing the switch inwards seating the retaining clips to the lower drivers side bezel.
2. Reconnect the electrical connector to the adjustable pedal switch.
3. Install the lower drivers side bezel.
