RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
Brake Pedal Assy: Service and Repair
REMOVAL
NOTE: The brake pedal is serviced as a complete assembly including accelerator pedal and the bracket.
1. Disconnect the negative battery cable.
2. Remove the steering column opening cover.
3. Remove the brake lamp switch and discard.
4. On vehicles equipped with adjustable pedals. Disconnect the adjuster cable to the pedal.
5. Remove the steering column.
6. Remove the brake booster.
7. Disconnect the electrical connectors.
8. Remove the module mounting bolts.
9. Disconnect the accelerator pedal cable.
10. Remove the pedal assembly mounting nuts/ fasteners.
INSTALLATION
1. Install the pedal assembly to the vehicle.
2. Install the mounting bolts and tighten to 28 Nm (21 ft. lbs.).
3. Reconnect the accelerator cable to the pedal.
4. Install the module mounting bolts and tighten to 38 Nm (28 ft. lbs.).
