RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
Brake Hose/Line: Service and Repair
Rear Brake Hose
REMOVAL - REAR BRAKE HOSE
1. Install prop rod on the brake pedal to keep pressure on the brake system.
2. Raise and support the vehicle.
3. Remove the brake line from the hose at the frame.
4. Remove the brake hose clip at the top of the hose located at the frame.
5. Remove the vent tube.
6. Remove the two brake lines at the bottom of the hose located at the axle.
7. Remove the mounting bolt for the brake hose at the axle.
8. Remove the hose.
INSTALLATION - REAR BRAKE HOSE
1. Install the hose.
2. Install the mounting bolt for the brake hose at the axle.
3. Install the two brake lines at the bottom of the hose located at the axle.
4. Install the vent tube.
5. Install the brake hose clip at the top of the hose located at the frame.
6. Install the brake line to the hose at the frame.
7. Lower the vehicle and remove the support.
8. Remove the prop rod.
9. Bleed the brake system.
