RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
Rocker Arm Assembly: Service and Repair
ROCKER ARM/ADJUSTER ASSY
REMOVAL
1. Disconnect the battery negative cables.
2. Remove cylinder head cover.
3. Remove the rocker arm/pedestal fasteners (Fig. 36) and remove rocker arm and pedestal from cylinder head. Mark the arms and pedestals so they
can be installed in their original position.
CAUTION: When removing the rocker arms, the sockets (Fig. 37) may come loose and fall into the engine. Make sure they stay with the arm
upon removal/installation.