RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
6.
Raise the vehicle on an appropriate hoist.
7.
Disconnect the two 14-way connectors located next to the transmission bell housing (Figure 5).
8.
Disconnect the PRNDL switch connector (Figure 5).
9.
Disconnect the transmission solenoid connector (Figure 5).
10.
Disconnect the output speed sensor connector (Figure 5).
11.
For trucks equipped with electric shift transfer case, disconnect the electric transfer case motor and encoder connectors (Figure 5).
12.
Disconnect the wiring harness routing clips.
Important:
Note the wiring harness routing before removing the harness from the vehicle.
13.
Lower the vehicle.
14.
Remove the transmission wiring harness from the vehicle.
