RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
Manifold Pressure/Vacuum Sensor: Service and Repair
REMOVAL
Fig.31 Intake/Map Sensor
The combination, dual function Intake Manifold Air Temperature Sensor/MAP (IAT/MAP) sensor is installed into the top of the intake manifold.
1. Clean area around sensor.
2. Disconnect electrical connector from IAT/MAP sensor.
3. Remove two T-15 Torx headed screws.
4. Remove sensor from intake manifold.
Fig.32 Sensor O-Ring