RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
Crankcase Vent: Service and Repair
CRANKCASE BREATHER
REMOVAL
1. Remove the oil fill cap.
2. Remove the breather cover bolts.
3. Remove breather cover.
4. Disconnect breather tube and lube oil drain tube from breather.
5. Remove breather mounting bolts.
6. Remove breather from cylinder head cover.
INSTALLATION
1. Install a new O-ring onto the breather element.
2. Lubricate O-ring and install into cylinder head cover. Torque capscrews to 10 Nm (89 in. lbs.).
3. Connect breather tube and lube oil drain tube.
4. Install breather cover. Torque to 24 Nm (18 ft. lbs.)
5. Install oil fill cap.
