RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
29.
Clear all diagnostic trouble codes from all modules before returning the vehicle to the customer.
30.
Disconnect the DRB III from the vehicle, disconnect the battery charger and continue with Section "B - Install Authorized Software Update
Label."
B. Install Authorized Software Update Label
Type or print (with a ballpoint pen) the part number, dealer code and date on the Authorized Software Update Label (Figure 1) and attach it to the ECM
that is located on the left side of the engine block. Cover the label with the clear plastic portion of the label.
C. Install the Authorized Modifications Label
Type or print (with a ballpoint pen) the recall number, dealer code and date on the Authorized Modifications Label (Figure 2). Then attach the label to
the upper radiator support crossmember.
