dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

18-003-04 > < Engine Controls - Long Crank Times in Extreme Cold|Page 5338
Page 5
background image

vehicle, if so equipped. Some DTC's may cause the MIL to illuminate. Check all modules using "Module Scan", record the DTC's, and erase these
DTC's prior to returning the vehicle to the customer. Erase any DTC's in the PCM only after all other modules have had their DTC's erased.

NOTE:

The following step is required by law.

27.

Type the necessary information on the "Authorized Modification Label" p/n 04275086AB and attach near the VECI label (Fig. 2).

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

18-003-04 > < Engine Controls - Long Crank Times in Extreme Cold|Page 5338