RAM 3500 Truck 2WD L6-5.9L DSL Turbo VIN C (2003)
"helping" direction before it enters the impeller. This circulation of oil from impeller to turbine, turbine to stator, and stator to impeller, can produce a
maximum torque multiplication of about 1.75:1. As the turbine begins to match the speed of the impeller, the fluid that was hitting the stator in such as
way as to cause it to lock-up is no longer doing so. In this condition of operation, the stator begins to free wheel and the converter acts as a fluid
coupling.
TORQUE CONVERTER CLUTCH (TCC)
The torque converter clutch is hydraulically applied or released when fluid is feed or vented from the hydraulic circuit by the Torque Converter
Control (TCC) solenoid on the valve body The torque converter clutch is controlled by the Powertrain Control Module (PCM). The torque converter
clutch engages in fourth gear, and in third gear under various conditions, such as when the O/D switch is OFF, or when the vehicle is cruising on a
level surface after the vehicle has warmed up. The torque converter clutch may disengage momentarily when an increase in engine load is sensed by
the PCM, such as when the vehicle begins to go uphill or the throttle pressure is increased.
